EasyManuals Logo

DRIFT Stealth 2 User Manual

DRIFT Stealth 2
70 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #28 background imageLoading...
Page #28 background image
87
settingsmode selection
TIMELAPSE MODE
(Purple LED) The camera
will capture a series of still
images at a specified rate
when ACTION is pressed
on the camera or remote.
To stop recording, press
ACTION on the camera or
STOP on the remote.
PHOTO MODE
(Yellow LED) The camera
will capture still images
when ACTION is pressed
on the camera or remote.
The LED will blink red every
time a photo is taken (this
applies for Timelapse and
Photoburst modes also).
PHOTOBURST MODE
(Cyan LED) The camera
will capture a burst of still
images for an allotted
duration, when ACTION
on the camera or remote is
pressed (for best results, use
a Class 6 or higher micro
SD card).
CAMERA SETTINGS
•EXPOSURE -2.0 / -1.0 / 0 / +1.0 / +2.0
•SELF-TIMER OFF / 3S / 5S / 10S
•WI-FI OFF / ON
•VIDEO TAGGING ON / OFF
•TAGGING INTERVAL 10S / 30S / 1MIN / 2MIN / 5MIN / 10MIN
•CAR DVR MODE ON / M / OFF
CAR DVR INTERVAL 1MIN / 3MIN / 5MIN / 10MIN / 15MIN
•VIDEO STANDARD NTSC (30) / PAL (25)
•MIC SENSITIVITY OFF / LOW / MED / HIGH
•SPEAKER VOLUME OFF / LOW / MED / HIGH
•RC 1-1 (Remote Control 1-1) ON / OFF
•RC 1-ALL (Remote Control 1-ALL) ON / OFF
•RC LED ON / OFF
•CAMERA LED ON / OFF
•CAMERA OFF OFF / 2MIN / 5MIN
•LCD BACKLIGHT ON / OFF
•LCD BACKLIGHT TIMER OFF / 5S / 10S / 20S / 1MIN
•DATE YEAR / MONTH / DAY
•DATE / TIME STAMP ON / OFF
•LANGUAGE [List of Languages]
•RESET SETTINGS YES / NO
•FORMAT MEMORY CARD YES / NO
• FIRMWARE VERSION CURRENT VERSION
*Note: In settings mode, pressing the CYCLE button
once will move the selection down one setting.
Holding the CYCLE button will move the selection
back up the list to facilitate navigation.
VIDEO MODE
(Green LED) The camera
will record video when
ACTION is pressed on the
camera or remote. The
LED will flash red while
recording. Press ACTION on
the camera, or STOP on the
remote, to end recording.
NTSC vs PAL
The camera records in
both NTSC and PAL video
standards (changeable from
the settings menu) NTSC
delivers frame rate intervals
of 30 (30, 60, 120) FPS
whereas PAL uses frame
rate intervals of 25 (25, 50,
100) FPS.

Table of Contents

Other manuals for DRIFT Stealth 2

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the DRIFT Stealth 2 and is the answer not in the manual?

DRIFT Stealth 2 Specifications

General IconGeneral
Video resolutions848 x 480, 1280 x 720, 1280 x 960, 1920 x 1080 pixels
Maximum frame rate120 fps
Supported video modes1080p, 720p, 960p
Video formats supportedH.264, MP4
Maximum video resolution1920 x 1080 pixels
Photo modeYes
Sensor typeCMOS
Total megapixels12 MP
Optical sensor size1/3 \
Effective megapixels (movie)3 MP
Light exposure modesAuto, Manual
Display diagonal1.3 \
Field of view (FOV) angle135 °
USB connector typeMicro-USB B
USB 2.0 ports quantity1
Storage mediaInternal memory + Memory card
Internal memory0.256 GB
Compatible memory cardsMicroSD (TransFlash), SDHC, SDXC
Maximum memory card size32 GB
GPS (satellite)No
Product colorBlack
Protection featuresDust resistant
Cables includedMicro-USB
Mac operating systems supportedMac OS X 10.2 Jaguar, Mac OS X 10.3 Panther, Mac OS X 10.4 Tiger, Mac OS X 10.5 Leopard, Mac OS X 10.6 Snow Leopard, Mac OS X 10.7 Lion, Mac OS X 10.8 Mountain Lion, Mac OS X 10.9 Mavericks
Windows operating systems supportedWindows XP Home
Battery voltage3.7 V
Battery capacity1500 mAh
Battery life (max)3 h
Weight and Dimensions IconWeight and Dimensions
Depth80 mm
Width42.6 mm
Height27.4 mm
Weight97 g

Related product manuals