11 12
mounting the camera
1. Attach the Universal Clip
to the camera in any 360°
orientation as needed—
first position the clip in
the desired orientation,
then secure by rotating
the screw base by hand
2. Slide the Universal Clip
into your chosen mount,
ensuring that it ‘clicks’
into place
*Double check it has been
fully inserted by pushing
out the clips
3. Align your shot. Rotate
the lens by hand until
the screen is orientated
correctly. Use the
lens marker as an ‘up’
reference.
accessory guide
TWOWAY REMOTE CONTROL
STEALTH 2
WATERPROOF CASE
DRIFT
VENTED HELMET MOUNT
Get connected with the Drift
Two-Way remote control.
Start/stop recording, change
mode and ensure recording
with Drift LED mode
indicator integration.
Become immersed with the
Stealth II Waterproof Case.
The dual locking system
creates an air tight seal and the
replaceable front lens keeps
the footage crystal clear.
Attach your Drift camera to
any vented bike, ski, or similar
sports helmet with the new
Drift Helmet Vented Mount.
*Note: For full accessory list visit driftinnovation.com
To Next Page
Loading...
Need help?
General
Weight and Dimensions
