DSC HS2016

Section 6: Programming Worksheets
EN
R 2 – Latching Troubles
o 3 – Not Used
o 4 – R-Button
o 5 – Audible Bus Fault
o 6 – Duress Code
R 7 – Temperature in Celsius
o 8 – Reset After Zone Activation
[020] System Options 8
Description on page 92
o 1 – Access Code Entry During Entry Delay
o 2 – EU Entry Procedure
EN
R 2 – EU Entry Procedure
o 3 – [*][8] Access While Armed
o 4 – Remote Reset
o 5 – Engineer's Reset
o 6 – Keyswitch Disarming During Entry Delay
o 7 – Installer Access and DLS
EN
R 7 – Installer Access and DLS
o 8 – Troubles Inhibits Arming
EN
R 8 – Troubles Inhibits Arming
[021] System Options 9
Description on page 93
o 1 – Trouble Display
o 2 – Keypad Blanking While Armed
o 3 – Auto-Arming Bypass
o 4 – Ready Display
o 5 – PGM Keypad Blanking
EN
R 5 – PGM Keypad Blanking
o 6 – Armed Display
o 7 – Open Cancels Arming
EN
R 7 – Open Cancels Arming
o 8 – Audible Exit Delay for Stay Arm
[022] System Options 10
Description on page 94
o 1 – [F] Key Option
o 2 – Not Used
- 145 -