DSC HS2016

Section 6: Programming Worksheets
o 2 – AC Trouble Light Flashes
EN
R 2 – AC Trouble Light Flashes
o 3 – Keypad Blanking
EN
R 3 – Keypad Blanking
o 4 – Keypad Blanking Requires Code
EN
R 4 – Keypad Blanking Requires Code
R 5 – Keypad Backlighting
o 6 – Power Save Mode
o 7 – Bypass Display When Armed
o 8 – Keypad Tampers Enabled
EN
R 8 – Keypad Tampers Enabled
[017] System Options 5
Description on page 89
R 1 – Chime on Opening
o 2 – Chime on Closing
EN
R 2 – Chime on Closing
o3 – Audible RF Jam Trouble Beeps
o 4 – Multi-Hit
o 5 – Late to Close
o 6 – Daylight Savings Time
o7 – Silence Chime During Quick Exit Delay
o 8 – Bell Squawk on Away Arm/Disarm
[018] System Options 6
Description on page 90
o 1 – Test Transmission Exception
o 2 – Real-Time Bypass Reporting
o 3 – Armed Status PGM ON at End of Exit Delay
o 4 – Not Used
5 – Keypad Buzzer Alarm
o 6 – Not Used
o 7 – Exit Delay Restart
CP-01
o 7 – Exit Delay Restart
o 8 – AC Fail Trouble Beeps
EN
R 8 – AC Fail Trouble Beeps
[019] System Options 7
Description on page 91
o 1 – Audible Wireless Zone Fault
o 2 – Latching Troubles
- 144 -