10
3.4 Programming Hexadecimal Data
Hexadecimal or ’Hex’ digits are often required for a pro-
gramming item, such as telephone numbers and reporting
codes. To insert a Hex digit into a given entry, press the [*]
key to enter the Hex menu. Use the arrow keys to scroll
through the each Hex digits (A through F). When the
desired letter is displayed, press the [*] key.
Hex digits can also be entered by pressing [*] key followed
by the number from 1-6 corresponding to each Hex letter
(A = 1, B = 2, C = 3, up to F = 6). Once the digit is entered,
the control panel will automatically return to the decimal
programming mode.
For example, to enter data ‘ABCD’ on a PC4020 you
would enter: [*], [1], [*], [2], [*], [3], [*], [4]
3.5 Programming Toggle Options
Many programming items are toggle options that are
either enabled or disabled. Use the arrow keys (< >) to
scroll through the toggle options. Press the [*] key to
switch back and forth between [Y]es (enabled) and [N]o
(disabled). Once all the toggle options have been pro-
grammed, press the [#] key to save your changes and
return to the previous menu.
To Next Page
Loading...
Need help?
General
