Quick Setup
1
Plan Plan the installation including all alarm detection devices,
zone expanders, keypads and other required modules.
2
Mount Decide on a location for the alarm panel and secure it to the
wall using suitable mounting hardware.
3
Wire Complete all wiring including modules, zones, bells/sirens,
telephone line connections and ground connections. Record
module serial numbers on page 16.
4
Power Connect the battery and power up the system. The battery
must be connected.
5
Enroll
First
Keypad
Hardwired: Wire the keypad to the Corbus, power up the
alarm panel then press any button on the keypad. Wireless:
Wire the HSM2Host to the Corbus, then power up the alarm
panel and a wireless keypad. Press any button on the keypad to
enroll it. The HSM2Host is then enrolled on the alarm panel.
Alternately, enroll an RF keypad.
6
Enroll
modules
[*][8][Installer Code][902] subsection [000]. Press [*] to
begin auto-enrollment. Module slots are automatically
assigned. Use scroll keys to view slots. Change slot by typing a
2-digit number.
7
Enroll
wireless
devices
[*][8][Installer Code][804] subsection [000]. Note: An
HSM2HOST or RF keypad must be enrolled first.
8
Program Basic programming: [*][8][installer code] [001]/[002]> Zone
Type/Zone Attribute [005]>[001] Partition 1 Timers: – Entry
Delay 1 – Entry Delay 2 – Exit Delay [301]>[001] Phone #1
[310]>[000] System Account Code.
9
Test Test the panel completely to ensure that all features and
functions operate as programmed. – [901] Walk Test – [904]
[000] Wireless Placement Test.
Compatible Devices
Throughout this document, x in the model number represents the operating
frequency of the device as follows: 9 (912-919 MHz), 8 (868MHz), 4
(433MHz).
Note: Only models operating in the band 912-919 MHz are UL/ULC listed
where indicated. Only UL approved devices are to be used with UL/ULC
listed systems.
Table 1-1 Compatible Devices
Modules
Wireless keypads HS2LCDWFx
UL
HS2LCDWFPx
UL
HS2LCDWFPVx
UL
Hardwired keypads with 2-way
wireless integration module
HS2LCDRFx
UL
HS2LCDRFPx
UL
HS2ICNRFx
UL
HS2ICNRFPx
UL
Hardwired keypads HS2LCD
UL
HS2LCDP
UL
HS2ICN
UL
HS2ICNP
UL
HS2LED
UL
Touchscreen Keypad
HS2TCHP
Note: For ULC-s559 Listed applications the HS2TCHP touch screen keypad is for supplementary use
only.
2-way wireless integration module HSM2HOSTx
UL
8-zone expander HSM2108
UL
8-output expander HSM2208
UL
Power supply HSM2300
UL
4 high current output expander HSM2204
UL
Alternate communicator 3G2080E
UL
3G2080RE
UL
TL2803GE
UL
TL2803GRE
UL
TL280E
UL
TL280RE
UL
LE2080(R)
TL280LE(R)
TL8803G
TL880LT
TL880LE
PCL-422
UL
Hardwired Devices
2-wire smoke detectors FSA-210x
UL
FSA-210xT
UL
FSA-210xS
UL
FSA-210xST
UL
FSA-210xLST
UL
FSA-210xR
UL
FSA-210xRT
UL
FSA-210xRS
UL
FSA-210xRST
UL
FSA-210xLRST
UL
y= A, B, or C
A: ULC listed models
B: UL listed models
C: European and Australian models
4-wire smoke detectors FSA-410x
UL
FSA-410xT
UL
FSA-410xS
UL
FSA-410xST
UL
FSA-410xLST
UL
FSA-410xR
UL
FSA-410xRT
UL
FSA-410xRS
UL
FSA-410xRST
UL
FSA-410xLRST
UL
y= A, B, or C
A: ULC listed models
B: UL listed models
C: European and Australian models
CO detectors CO-12/24
UL
12-24SIR
UL
FW-CO12
UL
FW-CO1224
UL
CO1224
UL
Wireless Devices
PG smoke detectors PGx926
UL
PG smoke and heat detector PGx936, PGx916
UL
PG CO detector PGx933, PGx913
UL
PG PIR motion detectors PGx904(P)
UL
PG PIR + camera motion detector PGx934(P)
UL
PG curtain motion detector PGx924
UL
PG dual tech motion detector PGx984(P)
PG mirror motion detector PGx974(P)
UL
PG outdoor motion detector PGx994
UL
PG glass break detector PGx912, PGx922
UL
PG shock detector PGx935
UL
PG flood detector PGx985
UL
PG temperature detector (indoor use) PGx905
UL
Outdoor temperature probe (requires PGx905) PGTEMP-PROBE
PG flat PIR PGx914
UL
PG recessed contact PGx307
UL
PG ceiling mount detector with Smart Presence – Short Range PGx862
UL
PG ceiling mount detector with Smart Presence – Long Range PGx872
UL
PG outdoor contact PGx312
UL
PG outdoor curtain PIR PGx902
PG keys PGx939
UL
PGx929
UL
PG panic key PGx938
UL
PG 2-button key PGx949
UL
PG sirens PGx901
UL
PGx911
UL
PG repeater PGx920
UL
PG door/window contacts PGx303, PGx975
UL
PG door/window contact w/ AUX PGx945
UL
Central Station Receivers
SG-System I, II, III, IV, 5
Enclosures
PC5003C, PC4050CR (ULC Fire Monitoring), PC4050CAR (UL Commercial Burg), CMC-1(UL
Commercial Burg), PC4051C. Other enclosures are available to suit a variety of system configurations.
WARNING: This manual contains information on limitations regarding product use and function and information on the
limitations as to liability of the manufacturer. The entire manual should be carefully read.
To download the full installation manual and register your product, please visit:
www.DSC.com/m/29009812 or scan the QR code to the right.
PowerSeries Neo Alarm Control Installation Guide
Use this guide in conjunction with the PowerSeries Neo Reference Manual available online from the DSC website.
To Next Page
General
