EN 50155 Documentation Compliance Overview
20MC50M00 E5
2020-10-20
82
j) equipment labelling description
1) Product (LRU) Part number
identification
Chapter Product Overview > Product
Identification
2) Product (LRU) Serial number
identification
Chapter Product Overview > Product
Identification
3) Product (LRU) Revision index
identification
Chapter Product Overview > Product
Identification
4) connectors identification Chapter Product Overview > Product
Architecture > Interfaces
5) other labels (fuses, battery, etc.) (if
any)
None
k) routine and type test compliance summary
1) list of performed test (routine and
type) on the equipment
Routine and type tests are controlled by
duagon-internal tools and documents.
Internal documents and more information
are available on request.
2) summary of the test methods,
reference standard and criteria
applied
l) ordering or commercial references
1) reference of Commissioning
Manual (if any)
Not relevant
2) reference of User Manual (if any) Not relevant
3) reference of Application Notes (if
any)
Information is provided as far as
appropriate in the relevant chapter.
A complete list of documentation is
available on the MC50M product web
page under "Documentation".
www.duagon.com/products/mc50m/#doc
4) reference of Equipment
Integration manual (if any)
Not relevant
5) reference of optional part for the
electronic equipment (if any)
Information is provided as far as
appropriate in the relevant chapter.
A list of orderable parts is available on the
MC50M product web page under
"Ordering Information".
www.duagon.com/products/mc50m/#ord
6) reference of accessories
associated to the electronic
equipment (if any)
Information is provided as far as
appropriate in the relevant chapter.
A list of orderable parts is available on the
MC50M product web page under
"Ordering Information".
www.duagon.com/products/mc50m/#ord
7) reference of special tools for
mounting, dismounting the
equipment (if any)
Not relevant
Requirement Compliance
To Next Page
Loading...