Duke TSC-6 - Opti-Mist Nozzle Screen Cleaning

Maintenance Manual for DUKE TSC Proofer
Oven with Touch Screen Controls
16
Figure 30: Opti-Mist Nozzle Filter
Clean Opti-Mist proofer nozzle screen.2.
Remove nozzle assembly by depressing latch •
on quick-connect tting and pull nozzle out
toward fan blade.
Use 3/4" and 5/8" wrenches to remove nozzle •
from body, remove, clean and re-install
lter.
Soak nozzle in plain white vinegar for 4-8 hours •
to dissolve mineral deposits. Wipe residue
from nozzle and rinse in clean water.
Do not insert objects into nozzle outlet as this •
can change the water spray performance.
Replace nozzle assembly if mineral deposits •
from hard water cannot be removed.
Reinstall nozzle by inserting into quick-connect •
tting until fully seated.