-6-
2011-09
22 / 40
850 mini
6.4.e - PULIZIA DEL CONTENITORE E DEL FILTRO
Sollevare il contenitore (1) ed inserire le barre di sicu-
rezza; alzare il coperchio (2) e bloccarlo in posizione tra-
mite l’asta (3).
Pulire con un getto d’acqua l’interno del contenitore, in
particolar modo il filtro in lamiera forata (4). Sganciare il
filtro di aspirazione (5) dai perni (6) e lavarlo accurata-
mente. Lasciare sgocciolare bene, rimontare il tutto ed
abbassare il contenitore.
6.4.f - PULIZIA BOCCA E TUBO ASPIRAZIONE
Sollevare il contenitore (1) ed inserire le barre di sicu-
rezza.
Pulire con un getto d’acqua la bocca di aspirazione (7)
ed il tubo di aspirazione attraverso la bocca (7).
850
4
2
5
6
1
2
3
7
6.4.e - HOPPER AND FILTER CLEANING
Lift the hopper (1) and secure it in place with the safety
bar; lift the cover (2) and lock it by the rod (3).
Use a hose to clean inside the hopper, and in particular
the perforated plate filter (4).
Release the intake filter (5) from the pins (6) and wash it
carefully.
Allow the intake filter (5) to drip dry completely,
reassemble the parts and lower the hopper.
6.4.f - SUCTION HOSE AND WASTE INTAKE DUCT
CLEANING
Lift the hopper (1) and secure it in place with the safety
bar.
Clean the waste intake duct (7) with a hose and the
suction hose through the waste intake duct (7).