To Next PageTo Next Page
Need help?Do you have a question about the Duncan EcoSeeder and is the answer not in the manual?
Describes checking for shipping damage and warranty terms for the machine.
States limitations of liability and owner's responsibility for safe operation and modifications.
Explains the purpose of the manual for familiarization, operation, adjustment, and maintenance.
Explains how the gearbox, seed rollers, and flaps work together to sow seeds into the prepared bed.
Stresses reading the manual, following instructions, and being prepared for emergencies with kits and numbers.
Covers appropriate dress, safe transport, road transport rules, and avoiding tip-overs.
Guidelines for handling agricultural chemicals, high pressure fluids, and general safe work practices.
Focuses on safe maintenance, machine support, electrical safety, welding, and using genuine spare parts.
Highlights specific hazard areas on the machine including pinch points, slippery surfaces, and areas to keep clear.
Covers chain guards, calibration safety, transport, maintenance, and lubrication references.
Provides crucial advice for avoiding damage, speed limits, and towing vehicle requirements.
Basic operational advice including tractor power, speed, and checks before seeding.
Covers recommended sowing speeds and factors affecting sowing depth.
Details on leveling the drill, transport position, and achieving ideal coulter penetration.
Provides sowing rates for front and rear/single boxes, including notes on chart columns.
Details on adjusting gearbox levers, shutter slides, and bottom flaps for seed rate.
Step-by-step procedure for performing calibration tests to confirm seed rate.
Tables showing the required number of hand crank turns for calibration based on machine size.
Instructions on how to use the disc calculator to determine the correct gearbox setting.
Discusses calibration deviations, wheel slip impact, and methods to check crank turns.
Specific procedure for sowing small and fine seeds using the appropriate metering wheels.
Covers calibration for small seeds and specific advice for sowing peas.
Factory configuration details for the Jackal v3 speed and area meter system.
Covers general safety, cautionary advice, welding, hydraulics, and water blasting during maintenance.
Details on grease usage, mixing precautions, and a chart of lubrication points and frequencies.
Covers bolted connections, gearbox, hydraulics, and general maintenance schedule for regular upkeep.
Details maintenance for drive chains, pivots, tyres, disc openers, tubes, and framework.
Covers adjusting bottom flaps for seed flow and preparing the machine for storage.
Provides sowing rates, hectaremeter settings, and handy operational hints for various seeds.
Step-by-step calibration guide and additional practical operational tips for accurate seeding.
General| Brand | Duncan |
|---|---|
| Model | EcoSeeder |
| Category | Tractor Accessories |
| Language | English |
