Wiring for the new switch on the top of the knife
Knife top position Clamp top position
switch switch
|______________| N/c |____________________| N/c |_____________ |
| | | | | |
S S A A U L
The SS,AA,and UL are all wiring points to the terminal, and on the switch.
Explanation: New switch on the top of the Knife.
The knife top position switch is a series connection with the clamp top position
switch, it is a new safety device for the Mark- II Programmatic signal, when the knife
does not go up to the top position, because of it, the backgauge will not move to the next
size.
https://www.supplychimp.com
To Next Page
Loading...
Need help?
General
