NOTE:
New Light Safety Curtain for 660 Cutter
The new light safety curtain will not work the older machines, because they do not have a AC 24 V power
wire fitted, if you would like to mount the new light safety curtain on the older machines you need to connect a 24
V wire form the transformer, and also you would have to do some modifation to the side tables, in order to mount
the light safety curtain.
The light safety curtain will work on machine above the serial number 0104034, and will not work below
that serial number without doing modifation.
Important Note: Use discretion when ordering this and any other parts or options. Check the serial number
of the machine or machines and compare them to the implementation number before ordering this option.
Fax all parts orders to the Parts Department at (949) 752-7766. If you require further information or
assistance, contact Duplo U.S.A. Technical Department, Graphic Arts Division at (949) 752-8222.
https://www.supplychimp.com
To Next Page
Loading...
Need help?
General
