Duplo DC-516 - Page 135

2
Specifi cations
117
Specifi cations
6
Model name DC-516
Number of cuts Max. 30 cuts/ sheets
Minimum cutting length 3. 0 mm (lead edge)
3. 0 mm (gutter cuts)
5. 0 mm (trail edge)
(A card cannot be positioned after 67.0 mm from the trail edge.)
Exit tray Drop down tray
Exit tray capacity 150 mm
Control panel Touch panel color LCD
Standard functions • Air knife
• Double feed detection
• Emergency stop switch
• Test feed
• Preset
• REG mark reading for image shift compensation (REG-01 required)
• Apply shrinkage
• Program by inch/mm
Panel languages Japanese, English, French, German, Italian, Spanish, Polish, Russian
Option 115V 115V
(PRO)
230V 230V AP 100V
REG

mark sensor Option
Standard Option Option Standad
Standard module Standard Standard Option Standard Option
Creaser module
Standard Standard Option Standard Option
Slitter module Option
Standard Option Standard Option
Cutter module Option
Standard Option Standard Option
Slot 1 motor kit Option Option Option
Standard Option
Rotary motor kit Option
Standard Standard Standard Option
Cutter module drive
kit
Option
Standard Standard Standard Option
Waste box set Option
Standard Standard Standard Option
Card stacker Option Option Option Option Option
Conveyor stacker Option
Standard Option Option Option
Connection kit
516-ST3
Option
Standard Option Option Option
Cut wastes blower Option Option Option Option Option
Long paper trays Option Option Option Option Option
Slitter inch gauge Option
Standard Option Standard Option
Power supply 100 V±10%, 50/60 Hz
115 VAC, 60 Hz
230 VAC, 50/60 Hz