General information
Additional Instructions D867 - 01.0 - 04/2020 3
1 General information
Important
The machine is not equipped with compressed air.
If you want to assemble the electropneumatic needle cooling to the
machine, you will need the following additional kits (see Parts List):
• 9780 000108: Compressed air maintenance unit
• 0867 594304: Pneumatic small parts pack
• 0797 003031: Pressure line K
1.1 Components of the kit 0867 594464
(needle cooling from above)
Check whether the scope of delivery for kit 0867 594464 is correct prior
to installation.
Part number Quantity Designation
0667 315433 1 Block
0867 594363 1 Blow tube
0669 979265 1 Hose 0.3 m
9790 000220 1 Nipple
9731 005004 1 Hose
9731 004054 1 Hose
9710 920016 1 Throttle check valve
9710 063420 1 Solenoid valve
0570 001847 1 Blanking plug
0798 120401 1 Cord clip
9874 867023 1 Cable
9840 121002 1 Cable tie
0791 867731 EN 1 Additional Instructions
To Next Page
Loading...
