DSP 260
30 Owner‘s Manual
6 Setup
The Setup menu allows access DSP 260’s global parameters on the LCD screen. This is where
preferences for many functions can be set or adjusted. Pressing the Setup button brings up the first Setup
window. Use the VALUE up/down arrows to scroll through the Setup menu: Use the <SELECT> buttons to
scroll to Setup parameters to make adjustments using the VALUE up/down buttons.
6.1 Setup Menus
Configuration
Configuration window is where you can select the desired setup for
your system. Use the <SELECT> key to navigate to the Mode
parameter to choose the best setup for your system. Use the up/
down VALUE arrows to choose between:
1. 2 Way Stereo + FR
2. 3 Way Stereo
3. 4 Way + FR
4. 5 Way + FR
5. Free Configuration
6. 3 Way Stereo-Mono Sub+FR
7. 4 Way Stereo-Mono Sub+LR
For more on Configuration Setup, see page 34.
IMPORTANT NOTE
To achieve optimum performance and guard against damage to the proces-
sor, your sound system or yourself, please read, understand and follow all of
the directions contained in this Owner’s Manual. Failure to do so may result
in improper performance, loss or injury.
Caution
Before operating the sound reinforcement system, and any time a new preset
is recalled, check the configuration display to make sure that it is appropriate
for your system and that connections to your system are correct for the cur-
rent configuration. Failure to do so could cause unexpected results or dama-
ge to the system or its components.
To Next Page
Loading...
Need help?
General
