DSP 260
Owner‘s Manual 7
Matrix Router / Mixer
• Two inputs (stereo)
• Summed left / right (mono) input
• Six assignable outputs
Outputs (each)
• Cross-over (hi-pass / low-pass filters), with selectable filter types
• 5-band parametric equalizer
•Delay
•Polarity
• Peak RMS detecting limiter
• Level & Mute
• 24-bit, 48 kHz D/A converters
Additional features include:
• Electronically balanced XLR inputs and outputs
• -6 dB switchable input level pad
• Contact closure interface for recall of up to eight selectable presets
• Front-panel USB port for connection to PC; preset editing and real time parameter control and monito-
ring.
• Firmware updates
• FLASH memory for preset storage and in-field firmware upgrades
• Input level meters
• 192 x 32 back-lit graphic LCD display
• LCD navigation / editing controls
• DSP block navigation short-cut controls
• Output level meters
• Output gain reduction meters
• Output assignment display LEDs; sub, low, mid & high
• Output channel Mute controls
• Auto-ranging internal power supply; 100-240 V AC, 50-60 Hz
• Standard IEC A.C. inlet with external, replaceable fuse
To Next Page
Loading...
Need help?
General
