Leaders in Pipeline Survey Systems
OPERATOR’S MANUAL
Issue 4.04 - 1207 25
4.2.1 Starting DEMO MODE
Switch on the C-SCAN: Press
Press Menu
Press Demo
Screen will show DEMO ON
Press X to return to main screen.
NOTE: since we are in DEMO mode GPS cannot be
used.
The main screen will now show “Demonstration ON”
above the C-SCAN 2010 message.
Now the detector is in Demo Mode, go back to QUICK START in Section 2.3.2 on page 13 and
follow the instructions. (It may help to have a photocopy of the survey lists) When you have
gone through the Survey 1 data and have just completed the last point (Current 52.64,
depth1.11) and are happy with the controls, come back to this point for more details.
Press
SETUP
To Next Page
Loading...
