D 10 29
Item Designation Brief description
44
Error / malfunction
call up
If a fault discovered on the drive engine is indicated by one of
the warning lamps, a code assigned to a defined defect can
be called up.
Pushbutton function:
- Upper switch position:
Call the fault code.
A
Press the switch until the three-digit code has been out-
put by the warning lamp.
A
Refer to the "Malfunctions" section for calling up
error codes!
45 Not used
46
Travel drive
fast/slow
Pushbutton function:
- Upper switch position:
Preselection of the speed level -
transportation speed (fast).
- Lower switch position:
Preselection of the speed level -
operating speed (slow).
47
Turning on
the spot
Detent switch function:
- Upper switch position:
Straight-ahead travel / standard operation.
- Lower switch position:
Turning on the spot -
The paver finisher turns on the spot (the caterpillar
chains run in opposite directions) when the steering is
turned to "10".
- Steering turned to the left = vehicle turns to the left
- Steering turned to the right = vehicle turns to the right
A
If the "Turning on the spot" function has been inadvert-
ently activated (and the steering is set to straight-
ahead travel), the paver finisher does not move. This is
often interpreted as a "malfunction".
A
The function can only be activated in the working gear
("travel drive slow") speed.
f
When the vehicle turns, persons and objects next to
the paver finisher are in extreme danger. Note the dan-
ger area!
To Next Page
Loading...
