B 16
5.12 Material compartment (hopper)
5.13 Material transfer
5.14 Material distribution
Volume
Approx. 6.5 m
3
= approx. 15.0 t
Minimum inlet height, centre 555 mm
Minimum inlet height, outside 560 mm
Hopper width, outside, open 3610 mm
Type Dual conveyor belt
Width 2 x 655 mm
Conveyors Left and right auger separately controllable
Drive Hydrostatic, 0/1
Conveying volume controller Fully automatic via configurable switching points
Auger diameter 380 mm
Drive
Hydrostatic central drive, continuously controlla-
ble independently of the conveyor
Auger halves can be switched to opposite direc-
tions
Reversible direction of rotation
Conveying volume controller Fully automatic via configurable switching points
Auger height adjustment - Mechanically
Auger extension With extension parts (see auger extension chart)
To Next Page
Loading...
