EasyManua.ls Logo

Dynapac F2500C - Page 121

Dynapac F2500C
410 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
D 10 33
Item Designation Brief description
77
Battery charge in-
dicator (red)
Must go out after starting when the engine revs up.
- If the light does not go out, switch off the engine
78 Not used
79
Error message
(yellow)
Indicates that there is a drive engine fault. Depending on the
type of fault, the vehicle can temporarily continue to be operat-
ed or, in the case of serious faults, should be shut down im-
mediately to prevent further damage from occurring.
Each fault should be rectified as soon as possible!
A
The error code can be called up using the switch
"Call up error / malfunction".
A
Lights up for a few seconds once the ignition has been
switched on for checking purposes.
80 Not used
81 Start inhibit
Indicates that an enabled function stops the machine
from starting.
82
Indicator lamp
Hydraulic oil
temperature
m
Lights up if the hydraulic oil temperature is too high.
Stop the paver finisher when if the temperature is too
high (drive lever in centre position), let the engine cool
down while idling. Determine the cause and correct it
if necessary.
83 Not used

Table of Contents

Related product manuals