EasyManua.ls Logo

Dynapac F2500C - Page 129

Dynapac F2500C
410 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
D 10 41
Item Designation Brief description
90
Emergency stop
button
Press in an emergency (danger to persons, impending colli-
sion, etc.)!
- Pressing the emergency stop button switches off the en-
gine, the drives and the steering system.
Making way, lifting the screed or other actions are then no
longer possible! Danger of accidents!
- The emergency stop button does not shut off the gas heat-
er system.
Close the main shut-off valve and the valves on the bottles
by hand!
- To restart the engine, the button must be pulled out again.
91 Horn
Press in the case of emergencies and to indicate when the ve-
hicle starts to move!
A
The horn can also be used to communicate acoustical-
ly with the truck driver for material loading!
92
Auger left/right
Operating mode
"AUTO" /
"OFF" /
"MANUAL"
Detent switch function:
-Operating mode "AUTO": The conveying func-
tion of the left / right half of the auger is switched
on when the drive lever is swivelled out and is
continuously controlled via the material limit switches.
-Operating mode "OFF": The conveying function
of the left / right half of the auger is switched off.
-Operating mode "MANUAL": The conveying
function of the left / right half of the auger is
switched on continuously with full delivery ca-
pacity, without material control via the limit switches.
f
On actuation, heed danger zones of moving parts of
the vehicle!

Table of Contents

Related product manuals