11
LP 650/750 — ILP650EN1
TECHNICAL DATA
Weight
Nettovikt, kg (lbs) 818 (1.804) 953 (2.101)
Operating weight, EN500, kg (lbs) 848 (1.870) 983 (2.168)
Compaction data
Vibr. frequency, Hz 63 63
Vibr. frequency, vpm 3780 3780
Centrifugal force, kN (lbf) 19 (4.275) 19 (4.275)
Amplitude, mm (in) 0,5 (0.02) 0,5 (0.02)
Operating data
Speed of travel, m/min (feet/min) up to 60 (197) up to 60 (197)
Max. tilt, % 30 30
Volymes
Fuel tank, lit. (qts) 7,0 (7.4) 7,0 (7.4)
Water tanks, l (gal) 56 (14.8) 56 (14.8)
Crank case, lit. (qts) 2,0 (4.2) 2,0 (4.2)
Hydraulic fluid, lit. (gal) 40,0 (10.6) 40,0 (10.6)
Eccentric element, lit. (qts) 0,5 (0.5) 0,5 (0.5)
Engine
Model Hatz Hatz
1D81S 1D81S
Recoil start Recoil start
Output, kW (hp) 8,9 (12) 8,9 (12)
Engine speed, rpm 2900 2900
Fuel consumtion, l/h (qts/h) 1,6 (1.7) 1,7 (1.8)
Noise and Vibrations
Noise level Sound pressure level at the operator's ear according to
ISO 6394:
L
pA
dB(A) = 91,2 94,2
Sound power level according to ISO 3744:
L
wA
dB(A) = 104,7 106,3
Vibration values Hand - arm vibration values according to ISO 5349:
a
m/s
2
=1,14,0
The above noise level and vibration values were determined at normal engine speed with vibration
on. The machine was placed on an elastic base.
During operation these values may differ because of the actual operational conditions.
A
LP 650 LP 750
To Next Page
Loading...
