Dynapac LP 650 - MAINTENANCE - SERVICE POINTS; First 20 Hours Maintenance; 250-Hour Maintenance Schedule; 500-Hour Maintenance Schedule

20
LP 650/750 — ILP650EN1
Item in fig. Maintenance see page Comments
3 Change the fuel filter 25
7 Change the hydraulic oil 25
8 Change the hydraulic filter 25
9 Change the oil in the eccentric element 26
Every 500 hours of operation (Once a year)
MAINTENANCE - SERVICE POINTS
Item in fig. Maintenance see page Comments
1,2 Replace engine oil and oil filter 23
4 Clean the engine air filter 23
5 Check and clean the engine air cooling system (See engine manual)
Check and adjust engine valve clearance (See engine manual)
14 Check the battery terminals 24
12,13,15 Clean and lubricate, as required, the controls,
handbrake and push-stop 24
Every 250 hours of operation (Once a year)
Item in fig. Maintenance see page Comments
1 Change engine oil 23
2 Clean / replace oil filter Se motorns instruktionsbok
4 Clean / replace air cleaner elements Se motorns instruktionsbok
Check and adjust the engine valve clearance Se motorns instruktionsbok
The first 20 hours of operation