Attaching the main unit and three legs.
The first, Set the both legs upright and
hang the both legs at the main unit, then
tighten the main unit with four bolts for
main unit as shown in the illustration.
After fixing the both legs to the main unit,
the remainder leg upright and hang the leg
at the main unit, then tighten the main unit
with two bolts for main unit.
Set the pedal stand assembly upright and
securely attach the pedal stand assembly
and the main unit assembly by using two
bolts.
For pedal stability, rotate the adjuster on
the bottom of the pedal stand assembly
until it comes in firm, contact with the floor
surface.
Attaching the main unit and pedal stand assembly
To reduce the risk of injury, The Digital Piano should be assembled by qualified service personnel.
Take care not to drop the unit and avoid strong impact.
11
Assembling Your Piano (Grand Piano )
1
2
Assembling Your Piano (Grand Piano)
To Next Page
Loading...