32
Reverb
Reverb
Reverb is an effect that recreates the decaying reflections of a sound in a performance space, and
reproduces the special ambience of a concert hall.
REVERB ON/OFF
To turn on reverb, press the REVERB button. The lamp lights and reverb is set on. The reverb pop-up
display appears.
To turn off reverb, press the REVERB button again. The lamp turns off and reverb(or chorus) is no
longer active.
SELECTING REVERB TYPE
Press the REVERB button. The reverb pop-up display appears in the LCD screen.
Select a desired reverb type by using the DATA buttons or the DATA wheel in the reverb pop-up
display.
The reverb pop-up display shows the current reverb type and total depth of the reverb.
There are 8 reverb types in the piano. Room 1, Room 2(default), Room 3, Hall 1, Hall 2, Plate, Delay and Pan Delay
In the meantime, when the reverb is on, press and hold down the SETUP button and press the
REVERB button. The reverb pop-up display appears.
The reverb type can be changed by using DATA buttons or the DATA wheel in this pop-up display.
Release the the SETUP button, the pop-up display returns to the main menu.
Display Hold
If the DISPLAY HOLD is on, the pop-up display does not return to main menu and the LCD screen shows the current pop-up
display.
To Next Page
Loading...