CHANGING THE OCTAVE SETTING OF THE SPLIT VOICE
The octave shift setting lets you adjust the pitch of the split voice. In the meantime, the octave shift setting
can be adjusted in the octave shift setting function. See the OCTAVE SHIFT section on page 39 .
Select the octave option.
Change the octave option by using the DATA buttons or the DATA wheel.
If you press both DATA UP and DOWN buttons at the same time automatically return to the default value (0). Range -1~0,~+1
If the DISPLAY HOLD is on, the pop-up display does not return to main menu and the LCD shows the current pop-up display.
Call up the split mode. To call up the split mode, press the SPLIT button. Lamp lights and
the split is set on. The split pop-up display appears.
Move the cursor to the octave value in the split pop-up display.
Press the YES button
in the split pop-up display until the cursor goes to the octave option.
Return to the main menu.
Press the NO button.
Even if you don't press the NO button, the pop-up display automatically returns to the main menu after 3 seconds. But if
the Display hold is on, you should press the NO button to return to the main menu.
31
Split
CHANGING THE PEDAL OPTION
This determines whether the damper pedal and assignable pedal affects the split voice in split function.
Select the pedal option.
Change the pedal option by using the DATA buttons or the DATA wheel.
If you press both DATA UP and DOWN buttons at the same time automatically return to the default value (ON).
If the DISPLAY HOLD is on, the pop-up display does not return to main menu and the LCD screen shows the current pop-up display.
Call up the split mode. To call up the split mode, press the SPLIT button. Lamp lights and
the split is set on. The split pop-up display appears.
Move the cursor to the pedal value in the split pop-up display.
Press the YES button in
the split pop-up display until the cursor goes to the pedal option.
Return to the main menu.
Press the NO button.
Even if you don't press the NO button, the pop-up display automatically returns to the main menu after 3 seconds. But the
Display hold is on, you should press the NO button to return to the main menu.
ADJUSTING THE MAIN VOICE VOLUME
Call up the volume pop-up display.
Press and hold down the SETUP button and press SPLIT(or LAYER) VOLUME UP or DOWN button.
The volume pop-up display appears.
Move the cursor to main voice in the volume pop-up display.
Press the YES button on the volume pop-up display. The cursor is moved from Sp(Split) to Ma(MAIN).
This means that the main voice volume can be changed by using the split volume up and down buttons.
Adjust the Main Voice Volume.
Adjust the main voice volume by using the SPLIT(or LAYER) VOLUME UP and DOWN buttons
If you press both VOLUME UP and DOWN buttons at the same time automatically return to the default Main Volume(100).
The range of volume is 0 ~ 100.
Hold the button for continuous decrementing or incrementing.
If the DISPLAY HOLD is on, the pop-up display does not return to main menu and the LCD screen shows the current pop-up display.
The DATA buttons or DATA wheel can adjust the volume instead of the VOLUME UP and DOWN buttons in the volume pop-up display.
Return to the play mode.
Release the SETUP button.
To Next Page
Loading...