Dynatone VGP-3000 - GM Voice; Main Voice Volume

There are 128 different voices in the piano. When the GM VOICE button is selected, one
of 128 GM voices can be assigned.
GM Voice
GM Voice
CHANGING THE GM VOICE BY DATA BUTTONS.
Press the GM VOICE button.
The Pop-up display shows you the current selected voice number and voice name.
Default GM voice: 25 Nylon Guitar
Select the desired voice by pressing the DATA buttons or the DATA wheel.
See the GM VOICE TABLE on page 56 in this manual.
POP-UP Display The pop-up display returns to the main menu after 3 seconds.
If the DISPLAY HOLD is on, the pop-up display does not return to main menu and the LCD screen shows the current pop-up display.
Backing Up the Selected Voice The last selected voice in each button will be retained in memory.
26
Main Voice Volume
ADJUSTING THE MAIN VOICE VOLUME
This determines the volume of the main voice.
Call up the volume pop-up display.
Press and hold down the SETUP button and press LAYER(or SPLIT) VOLUME
UP or DOWN button. The volume pop-up display appears.
Move the cursor to main voice in the volume pop-up display.
Press the YES button on the volume pop-up display. The cursor is moved from
Ly(LAYER) to Ma(MAIN).
This means that the main voice volume can be changed by using the layer
volume up and down buttons.
Adjust the main voice volume.
Adjust the main voice volume by using the LAYER(or SPLIT) VOLUME UP and DOWN buttons
If you press both VOLUME UP and DOWN buttons at the same time automatically return to the
default main volume(100). The range of volume is 0 ~ 100.
Hold the button for continuous decrementing or incrementing.
If the DISPLAY HOLD is on, the pop-up display does not return to main menu and the LCD screen
shows the current pop-up display.
The DATA buttons or DATA wheel can adjust the volume instead of the VOLUME UP and DOWN
buttons in the volume pop-up display.
Return to the play mode.
Release the SETUP button.