DynaVox Technologies
26
Setting Backlight Timeout
You can conserve battery power by selecting a backlight timeout setting for your device. When your
device is on, the backlight timeout feature will slightly dim the touch screen if a selection has not been
made for a specified period of time. When the device is in backlight timeout mode, you need simply to
make a selection anywhere on the screen to return to the normal screen brightness.
1. Select the pull-down menu button in the title bar at the top of the touch screen.
2. Select Setup in the main pull-down menu.
3. Select System Settings in the second pull-down menu. The System Settings menu will open.
4. Select the Backlight Timeout pull-down menu. The menu will expand.
5. Select one option. The pull-down menu will close and display the option you selected.
6. Select the OK button to close the System Settings menu.
Using the Page Navigator
Use these steps to open a new communication page.
1. Select the pull-down menu button in the title bar at the top of the touch screen.
2. Select Setup in the main pull-down menu.
3. Select Page Navigator in the second pull-down menu.
The left viewport in this menu contains a list of the page sets. Each page set is displayed as an individual
folder. When a page set folder is selected, the right viewport will display a list of the pages and popups
that are stored within the folder. You may scroll through the viewports to find the page you want to open,
or you may use the Search feature to quickly locate a specific page by name. If you want to use the scroll
buttons, continue with step 4. If you want to search for a page, proceed to step 5.
To Next Page
Loading...