DyneSystems DS820F - Page 4

Table of Contents
SECTION 7: APPLICATION SPECIFIC FUNCTIONALITY 24
COMMAND VOLTAGE SCALING ..........................................................................................24
CURRENT FEEDBACK ........................................................................................................24
SCALED CURRENT FEEDBACK .........................................................................................24
DYN-LOC IV INTERFACE .....................................................................................................24
50HZ / 60HZ OPERATION ....................................................................................................24
LOW INDUCTANCE COIL.....................................................................................................24
LOW MAX CURRENT ...........................................................................................................24
0-20MA COMMAND SOURCE .............................................................................................24
ADDITIONAL SAFETIES ......................................................................................................25
DS820F CONTROL BOARD JUMPER DEFINITIONS .........................................................25
SECTION 8: FAULTS /TROUBLESHOOTING 26
WALL MOUNT AND RACK MOUNT TROUBLESHOOTING GUIDE ....................................26
WALL MOUNT SIGNALS ......................................................................................................28
RACK MOUNT SIGNALS .....................................................................................................30
SECTION 9: CUSTOMER SUPPORT 31
SECTION 10: PRODUCT WARRANTY 32
APPENDIX A: PAU MAX CURRENT ADJUSTMENT 33
APPENDIX B: OHM’S LAW 35
APPENDIX C: DRAWINGS AND SCHEMATICS 36
RACK MOUNT CONNECTIONS - 15 AMP ...........................................................................36
RACK MOUNT CONNECTIONS - 30 AMP ...........................................................................37
WALL MOUNT SCHEMATIC.................................................................................................38
APPENDIX D: CURRENT MODULE REQUIRED CONDUCTOR DEFINITION 39
APPENDIX E: ACRONYMS 40
Dyne Systems • DS820F PAU
DPD-001-04B • © Copyright Dyne Systems, Inc.
3