DyneSystems DS820F - CURRENT MODULE REQUIRED CONDUCTOR DEFINITION

Appendix D - Required Conductor Denition
APPENDIX D: CURRENT MODULE REQUIRED CONDUCTOR DEFINITION
Conductor Count for 100 Amp LEM Current Module (1000:1)
Feedback Resistor (R36): 50 Ohms
Required Number of Conductors PAU Max Current Rating Expected Voltage Across FB Resistor @ Max Current (V)
1 100.00 5.00
2 50.00 5.00
3 33.33 5.00
4 25.00 5.00
5 20.00 5.00
6 16.67 5.00
Conductor Count for 35 Amp LEM Current Module (1000:1)
Feedback Resistor (R36): 150 Ohms
Required Number of Conductors: PAU Max Current Rating Expected Voltage Across FB Resistor @ Max Current (V)
1 33.33 5.00
3 11.11 5.00
Dyne Systems • DS820F PAU
DPD-001-04B • © Copyright Dyne Systems, Inc.
39