Above Ground Model 250i Motorcycle Dynamometer Installation Guide
3-24
FOLDING RAMP
The folding ramp (P/N 82944001) allows you to easily and safely load motorcycles
onto the dyno. This section will walk you through removing the ramp from the crate
and installing the ramp on model 200i and 250i motorcycle dynos. To ensure safety
and accuracy in the procedures, perform the procedures as they are described.
REMOVING THE RAMP FROM THE CRATE
1 Remove the crate top.
Figure 3-26: Remove the Crate Top
To Next Page
Loading...
Need help?
General
