E Instruments E4500-N User Manual

30
K000000000EJ 023826A0 100714
9.2.5 Configuration→Analysis→Measurement units
Example:
Measurement unit can be set as: ppm - mg/m
3
- mg/kWh - g/GJ - g/m
3
- g/kWh - %
Measurement unit can be set as: ppm - mg/m
3
- mg/kWh - g/GJ - g/m
3
- g/kWh - %
Measurement unit can be set as: ppm - mg/m
3
- mg/kWh - g/GJ - g/m
3
- g/kWh - %
Measurement unit can be set as: °C - °F
Measurement unit can be set as: hPa - Pa - mbar - mmH 2 O - mmHg - inH 2 O - psi
CONTEXT KEY FUNCTION
Enters the modification mode for the selected parameter.
Confirms the modification.
OK
KEY FUNCTION
Activate the context keys shown on the display.
Keys '▲' and '▼' select any line shown on the display (the selected line is
evidenced in red).
When in modify mode, sets the desired value.
When pressed in modify mode cancels the selection made, otherwise
returns to the previous screen.
Enters edit mode of the selected element and then confirms the change.
OK
→
Pressure hPa
Temperature °C
SO
2
ppm
NO
X
ppm
CO ppm
Configuration
Measure units
07/08/14
10:00
Pressure hPa
Temperature °C
SO
2
ppm
NO
X
ppm
CO ppm
Configuration
Measure units
07/08/14
10:00
Pressure hPa
Temperature °C
SO
2
ppm
NO
X
ppm
CO ppm
Configuration
Measure units
07/08/14
10:00
OK
Pressure hPa
Temperature °C
SO
2
ppm
NO
X
ppm
CO Mg/m
3
Configuration
Measure units
07/08/14
10:00
OK
Pressure hPa
Temperature °C
SO
2
ppm
NO
X
ppm
CO Mg/m
3
Configuration
Measure units
07/08/14
10:00

E Instruments E4500-N Specifications

General

Brand	E Instruments
Model	E4500-N
Category	Measuring Instruments
Language	English