E.T. Systems Drive 300 - Auto-Close Override and Party Mode

47
User manual reference -
Page 22
Auto-close override/party mode.
Advanced features
This feature is useful at mes when the gate must be kept open for extended periods of me. When cung the lawn on the pavement for
instance. With Auto-close override/party mode acve any trigger on any input will simply result in the control card beeping to indicate the gate
is being kept open intenonally. As soon as auto-close override/party mode has been deacvated, the system will resume normal operaon.
Auto-close override/party mode will work in any posion except the closed posion.
Auto-close override/party mode is not available in condominium mode.
Acon Response
Momentary trigger
from any transmier
buon programmed
into holiday lock-out
funcon.
Buzzer begins toning and
status LED comes on.
BT buon while buzzer
is sounding to conrm
that you want to
acvate Auto-close
override/party mode.
If no BT buon is
pressed during this 5
second window, the
auto-close/party mode
status will not change.
Buzzer and status LED beep/
ash rapidly.
Any BT or PED triggers.
Gate does not move.
Buzzer, status LED beep/
ash rapidly to conrm
status.
Momentary trigger
from any transmier
buon programmed
into holiday lock-out
funcon.
Buzzer begins toning and
status LED comes on.
BT buon while buzzer
is sounding to conrm
that you want to
deacvate Auto-close
override/party mode.
If no BT buon is
pressed during this 5
second window, the
Auto-close override/
party mode status will
not change.
Buzzer beeps, status LED
reverts to gate running
indicaon and gate begins
closing.
Normal operaon is now funconal.
Gate in any posion
except closed.
STOP
x 5 sec.
STOP
x 5 rapid.
STOP
x 5 rapid.
STOP
x 5 sec.
STOP
x1