65
lected from your waypoint list, a map feature or from the Points of In-
terest list.
1. Press
WPT
|→ to
S
UBCATEGORY
column|↓ to
N
EW
|
ENT
.
2. Press ↓ to
P
ROJECTED
P
OSITION
|
ENT
|→ to
C
REATE
|
ENT
.
3. Press → to
C
HOOSE
R
EFERENCE
|
ENT
. Use ↑ and ↓ to select a waypoint,
map feature or Point of Interest. When the point has been selected,
press
ENT
and the point's position appears as the reference position.
4. Press ↓ to
D
ISTANCE
|
ENT
. Press ↑ or ↓ to change the first character,
then press → to the next character and repeat until the distance is cor-
rect. Press
ENT
.
5. Press ↓ to
B
EARING
|
ENT
. Press ↑ or ↓ to change the first character,
then press → to the next character and repeat until the bearing is cor-
rect. Press
ENT
.
6. Press ↑ to
P
ROJECTION
|
ENT
. The Edit Waypoint menu appears. You
can simply save the new projected waypoint by pressing
EXIT
|
EXIT
or
you can edit the waypoint. (Press
EXIT
|
ENT
if you want to immediately
begin navigating to the new waypoint.)
To Next Page