Eaglemaster E8 - 6-PIN CON1 Connector for Engine start wiring; 6-PIN CON1 Connector for Start;Stop button function; 6-PIN CON3 Connector for Door Lock wiring; 4-PIN Connector for sensors

6-PIN CON1 Connector for Engine start wiring
6-PIN CON1 Connector for Start/Stop button function
(PROG. Table-3 of NO.13)
6-PIN CON3 Connector for Door Lock wiring
4-PIN Connector for sensors
Black/yellow
Black/yellow
blue
blue
Green
Green
Yellow
Yellow
Yellow/black
Yellow/black
red
red
30A
30A
1
1
2
2
3
3
4
4
5
5
6
6
Starter ON output (+)
Start/Stop button (+)
output
ACC (+) output (prog.)
(acc circuit , air-con &
heater..)
check Table-3 of No.6
Foot brake(+) output
ACC ON output (+)
ACC ON output (+)
Starter input (+)
Starter input (+)
IGN1 output(+)
the wire will active
when remote start
and engine running
Ignition (+) output
Positive power
(+) 12VDC input
Positive power
(+) 12VDC input
Green
Green/black
Blue/black
Green/red
Blue/red
Blue
Door Lock COM
Door Lock N/C
Door Unlock N/C
Door Lock N/O
Door Unlock N/O
Door Unlock COM
Red
Black
Blue
Green
(+)12V DC
(-) When Armed
1st stage (-) input
2nd stage (-) input