Vantage Series 2200
Scope
This manual contains information concerning the installation, operation and maintenance
of the Vantage 2210/2220. To ensure proper performance of the unit, the instructions
should be thoroughly understood and followed.
Keep the manual in a readily accessible location for future reference.
Changes and additions to the original edition of this manual will be covered by a
“CHANGE NOTICE” supplied with the manual. The change notice will identify the sections in this
manual where the changes have occurred.
Vantage 2210/2220
Table of Contents
General Specifications............................................................................................................ 1-2
General Description................................................................................................................ 1-3
Installation Procedure.......................................................................................................... 2-1
Enclosure Mounting ............................................................................................................... 2-1
Sensor Mounting .................................................................................................................... 2-2
Wiring Connections................................................................................................................ 2-4
Splice Procedure..................................................................................................................... 2-6
Programming........................................................................................................................ 3-1
QuikCal Menu Functions ....................................................................................................... 3-1
Program ............................................................................................................................. 3-2
Level Mode...................................................................................................................... 3-2
Flow Mode....................................................................................................................... 3-3
Totalizer........................................................................................................................... 3-5
4-20 Output...................................................................................................................... 3-6
Setpoints........................................................................................................................... 3-6
Sensor Calibration............................................................................................................ 3-6
Damping........................................................................................................................... 3-7
Lost Echo......................................................................................................................... 3-7
Flow Simulation............................................................................................................... 3-7
Integrator.......................................................................................................................... 3-7
Pump Alternation............................................................................................................. 3-7
Relay Assignment............................................................................................................ 3-8
Status.................................................................................................................................. 3-8
Data Logger ....................................................................................................................... 3-9
System Setup...................................................................................................................... 3-10
Calibration......................................................................................................................... 3-11
Sensor Mounting for Primary Elements ............................................................................ 3-12
Parts List ............................................................................................................................... 3-17
Section
1
1-1
942001Rev
1.06 04/07
To Next Page
Need help?
General
