EasyIO FW Series User Manual

EasyIO FW Series – User Reference v3.0
21
FW Series Wi-Fi Access Point name is preset at factory.
Each unit has 2 Wi-Fi Access Point as below.
SSID 1 : FW-xxxx , where xxxx is the last 4 digit of the MAC address 01.
SSID 2 : Conf-xxxx , where xxx is the last 4 digit of the MAC address 01 (Hidden by default)
Mac Address label located at the bottom casing top right hand corner of each FW series controller.
The MAC address label is available on the circuit board as well , above the ethernet ports.
Password for both SSID is 12345678.
** Please change the password to secure the connection**
In the example above, the MAC address 1 is 38:D1:35:02:01:2A, you should to scan the SSID as FW-012A
from any Wi-Fi Scanner.
Image below shows a Wi-Fi scanner from a Windows Operating system.

EasyIO FW Series Specifications

General

Brand	EasyIO
Model	FW Series
Category	Controller
Language	English