Eaton 5115 User Manual

Eaton 5115 Rack-Mount UPS (500–1500 VA) User's Guide S 164201449 Rev B www.eaton.com/powerquality
23
Chapter 3 Installation
This section explains:
S Equipment inspection
S UPS internal battery connection
S UPS setup and installation
S UPS rear panels
Inspecting the Equipment
If any equipment has been damaged during shipment, keep the shipping
cartons and packing materials for the carrier or place of purchase and file
a claim for shipping damage. If you discover damage after acceptance,
file a claim for concealed damage.
To file a claim for shipping damage or concealed damage: 1) File with
the carrier within 15 days of receipt of the equipment; 2) Send a copy of
the damage claim within 15 days to your service representative.
NOTE Check the battery recharge date on the shipping carton label. If the date has expired
and the batteries were never recharged, do not use the UPS. Contact your service
representative.

Eaton 5115 Specifications

General

Form Factor	Tower
User-selectable Output Voltage	No
Frequency	50/60 Hz
Topology	Line Interactive
Communication Ports	Serial, USB
Output Frequency	50/60 Hz
Input Frequency	50/60 Hz
Battery Type	Sealed, lead-acid
Typical Recharge Time	8 hours
Operating Temperature	0 to 40°C
Storage Temperature	-15 to 45°C
Humidity	0% to 95% relative humidity, non-condensing