ADDITIONAL UPS FEATURES
Eaton 5115 Rack-Mount UPS (500–1500 VA) User's Guide S 164201449 Rev B www.eaton.com/powerquality
41
Load Segments
Load segments are sets of receptacles that can be controlled by power
management software, providing an orderly shutdown and startup of
your equipment. For example, during a power outage, you can keep key
pieces of equipment running while you turn off other equipment. This
feature allows you to save battery power. See your power management
software manual for details (refer to the Software Suite CD or
www.eaton.com/powerquality for the latest information).
NOTE If power management software is not used, the individual load segments cannot be
controlled.
Each model has two load segments as shown in Figure 20 and
Figure 21. The Load 1 and Load 2 indicators on the UPS front panel
illuminate when output power is available to the specific load segment.
Load Segment 1 Load Segment 2
Figure 20. UPS Load Segments for 120V Models
Load Segment 1 Load Segment 2
Figure 21. UPS Load Segments for 230V Models
To Next Page
Loading...
