Eaton Powerware 9125 - Page 57

UPS MAINTENANCE
EATON Powerware
®
9125 Two-in-One UPS (700–2000 VA) User’s Guide S 164201514 Rev B www.powerware.com
51
4. Replace the EBM. See “Recycling the Used Battery or UPS” on
page 52 for proper disposal.
5. Reinstall the joining brackets if removed in Step 2.
6. Plug the new EBM into the UPS as shown in Figure 32.
For additional EBMs, plug the EBM cable into the battery connector
on the adjacent EBM.
UPS Battery
Connector
Joining Brackets
EBM Battery
Connectors
EBM Cables
Figure 32. EBM Connections (120V Model Shown)
NOTE The battery connectors are designed to ensure proper connection with the correct
EBM model (use EBM model PW9125 24 EBM with 700–1000 VA UPSs and EBM model
PW9125 48 EBM with 1250–2000 VA UPSs).