INSTALLATION
Eaton 9135 Two-in-One UPS (5000/6000 VA) User's Guide S 164201726 Rev 3 www.eaton.com/powerquality
34
9. Align each joining bracket with the adjacent cabinet screw holes
and secure with the supplied screws (see Figure 16).
NOTE Joining brackets are required for installations with two or more cabinets.
Joining Bracket
Figure 16. Installing the Joining Brackets
10. If installing additional EBMs, repeat Step 6 for each cabinet.
11. Continue to the following section, “Installing the UPS.”
To Next Page
Loading...
