Eaton Powerware 9135 - Maintenance; Hot-Swapping the Power Module

Eaton 9135 Two-in-One UPS (5000/6000 VA) User's Guide S 164201726 Rev 3 www.eaton.com/powerquality
57
Chapter 5 Additional UPS Features
This section describes:
S Communication ports
S Network Management Card
S Load segments (PowerShare)
Communication Ports
The Eaton 9135 provides three communication methods that can be
used simultaneously:
S RS-232 or USB communication. Compatible with most power
management software applications. Note that both ports cannot be
used at the same time.
S The relay port uses output contacts for basic signaling or for
protection of IT systems like IBM
®
iSeries
®
(formerly AS/400
®
) and
more.
S The communication bay is compatible with the optional Network
Management Card.