Eaton Powerware 9135 - Anticipate Maintenance; Reset or Disable LCM

OPERATION
Eaton 9135 Two-in-One UPS (5000/6000 VA) User's Guide S 164201726 Rev 3 www.eaton.com/powerquality
56
Anticipate Maintenance
Automatic warnings appear when maintenance actions need to be
planned:
Table 8. LCM Warning Details
LCM Warning Details Signification
BATTERY CHECK RECOMMENDED Battery is approaching its reliability end of life.
Risk to reduce dramatically backup time.
Reset or Disable LCM
In case of any LCM messages displayed:
S For temporary reset: press the esc button for at least three seconds
while in the Status and Alarm menu to temporarily cancel the alarm
status.
The alert will be repeated twice every 30 days.
S For permanent reset: press the button for at least three seconds
while in the LCM warning menu to permanently cancel the LCM
event.
At any time:
S To disable all LCM messages, select disable all while in the LCM
menu.
Be careful: if you disable all LCM messages, you will not be aware of
any LCM events that can happen on the UPS.