OPERATION
Eaton 9135 Two-in-One UPS (5000/6000 VA) User's Guide S 164201726 Rev 3 www.eaton.com/powerquality
51
Bypass Mode
The UPS transfers to Bypass mode when:
S The utility power is out of tolerence
S There is an overload condition
S The button is pressed
S There is a malfunction
The
and indicators illuminate and the equipment is powered by
utility power.
Display Functions
Figure 31 shows the basic menu structure.
Status and Alarms
Measurements
MaintenanceUPS Setup
UPS Input Measurements
Status and Alarms
UPS Output Measurements
Battery Measurements
Local Settings
Output Settings
ON/OFF Settings
Battery Settings
Model
Alarm History
Manual Batt Test
LED & Buzzer Test
LCM
Statistics
Figure 31. Menu Map for Display Functions
To Next Page
Loading...
