Eaton Remote Power Panel - Figure 10. Isolated Ground Connections (each Side) for Direct Connect RPP

Installation
Eaton Remote Power Panel (RPP) User’s Guide 164202125—Rev 5 www.eaton.com/powerquality 19
Figure 10. Isolated Ground Connections (each side) for Direct Connect RPP
Input Ground Terminal
Ground CT
Pass the isolated ground cable
through the ground CT in the
direction the arrow is pointing
and connect to input ground
terminal.
Input Ground Terminal
Ground CT
Pass the isolated ground cable
through the ground CT in the
direction the arrow is pointing
and connect to input ground
terminal.
Chassis Ground Terminal
Note: Small RPP shown. Connections are the same for the Large RPP