Copyright © 2008-2011 Eaton Corporation. All Rights Reserved.
IPN 997-00012-63C August 2011
About This Guide
Scope
This guide covers operation of the SC100 system controller Version 2.12 or later.
Audience
This guide is intended for use by:
Installers competent in:
installing and commissioning dc power systems
safe working practices for ac and dc powered equipment
the relevant local electrical safety regulations and wiring standards
Operators and maintenance staff competent in:
operation of dc power systems
safe working practices for ac and dc powered equipment
Related Information
PowerManagerII Online Help
DCTools Online Help
Reporting Problems with this Guide
Please use this email address to report any problems you find in this guide:
Eaton DC Product Marketing Communications
EMAIL: DCMarketingNZ@eaton.com
For Further Information and Technical Assistance
For further information and technical assistance see Worldwide Support on page 75.