Eaton Scantronic i-on10 - Page 71

Installer Menu Map
Page 71
Strobe on Set
Off
Strobe on Unset
Off
4 System Options
User Options
User Access
HUA keys active
No
Quick set
No
Quick omit
No
User code reqd
Yes
Duress Enable
No
Terminated Set
Yes
Used for KEY-EP.
Tamper Omit
No
Silence Alerts
User Code
User Reset
Zone alarms
Yes
Available only if Confirmation Mode is
”Basic”.
Zone tampers
Yes
System tampers
Yes
Code tampers
Yes
Keypad Text
Model name
Restore
Defaults
Staged defaults
Users
User 01
Zones
Outputs
Setting Info
System Options
Communications
Factory defaults
Installer
Options
Installer Name
“Installer”
Installer Code
Installer configured
Installer Timeout
60 minutes
Service Date
01/01/1900
Service Banner
Disabled
Confirmation
Confirmation Mode
DD243
These options are available only when
the country version is the UK. For all
other countries, Basic is used.
BS8243
Default for UK systems
Basic
Confirmation Time
30 minutes
Available for BS8243 or DD243.
Entry Alarm Delay
Yes
After Entry
1 zones
Available for BS8243 or DD243.
Default changes to 2 zones when
Confirmation Mode = DD243.
Entry Keypad Lock
Off
Available for BS8243 or DD243.
Sounder on
Unconfirmed
Siren on
Unconfirmed
Unconfirmed reset
User
Available for BS8243 or DD243.
Confirmed reset
Installer
Available for BS8243 or DD243.
HUA Response
Audible
HUA Confirm Time
8 hours
Available for BS8243 only.
Tamp as Tamp-Only
Enabled
Available for BS8243 only.
Abort Time
120 seconds
Auto Rearm
Never
Available only when Confirmation
Mode is “Basic”.
Hardware
Panel Name
Wired Zone Type
Panel Zones
2 Wire FSL 2k2/4k7
Panel Loudspeaker
Volume
4
Mains Fail Delay
0 minutes
Linked Zone Time
10 seconds
Panel Tamper Return
CC
Reset Codes Pins
Enabled
Date and
Time
Set Date & Time
Updates
Language