P.29
PM10U
EBARA
CORPORATION
Table. 5.1 Explanation of operation panel.
No. Name Subject
(1) POWER Lamp Lights up when power is supplied
(2) ALARM Lamp Lights up in red when inverter trips
(3) PROGRAM Lamp Does not light up
(4) RUN Lamp Lights up when running
(5) MONITOR Lamp(Hz) Lights up when LED display indicates frequency
(6) MONITOR Lamp(A) Lights up when LED display indicates current
(7) LOCAL/REMOTE Lamp Lights up when running in local mode(light out in remote mode)
(8) LED Indicator Indicate run time, rotation speed and inverter 2ndary side current
(9) RUN switch Starts up the pump (Only in local mode)
(10) STOP/REST Switch Stops the pump, and reset
(11) ESC Switch Switches between LED indicator and group code
(12) Up Switch
(13) Down Switch
Operates data indicator
(14) SET Switch Switches between indicated data and content
To Next Page
Loading...
