Echo CS-310

STARTER SYSTEM
CS-310
10
2-3 Assembling starter
1. If rewind spring (A) is unwound from rewind
spring case (B), wind the spring inside case as
shown.
2. Carefully install rewind spring case assembly
(C) on starter case, matching hole (c) with post (D).
Hook (a) of rewind spring should contact with post
(E) of starter case.
3. Assemble rope reel (F) engaging hook (f1) with
hook (a) of rewind spring.
4. Check for proper engagement of rewind spring
and rope reel by turning rope reel (F) clockwise
and counterclockwise.
A
B
E
D
c
C
F
f1
a
a
F