Echo EGi-3600LN User Manual

34
FUEL TANK FILTER
WARNING
• Never use the gasoline while smoking or in the
vicinity of an open ame.
1. Remove the fuel tank cap and lter.
2. Clean the lter.
3. Wipe the lter dry and reinstall it.
4. Install the fuel tank cap.
Be sure the fuel tank cap is tightened securely.
FUEL FILTER
1. Remove the screws (1), and then remove the cover (2), and drain
the fuel.
2. Hold and move up the clamp (4), then take o󰀨 the hose (5) from
the tank.
3. Take out the fuel lter.
4. Clean the lter.
5. Dry the lter and put it back into tank.
6. Install the hose and clamp, then open the fuel valve to check
for leaks.
7. Install the cover and tighten the screws.
MAINTENANCE
- 31 -
6. Install the muffler screen and the muffler cap.
7. Install the cover and tighten the screws.
6.6 Fuel tank filter
Never use the gasoline while smoking or in the
vicinity of an open flame.
1. Remove the fuel tank cap and filter.
Fuel tank cap
2. Clean the filter with gasoline.
3. Wipe the filter and install it.
4. Install the fuel tank cap.
Be sure the fuel tank cap is tightened securely.
6.7 Fuel filter
1. Remove the screws ①, and then remove the cover ②, and drain the fuel③
2. Hold and move up the clamp ④, then take off the hose ⑤ from the tank.
②
1
3. Take out the fuel filter
.
4. Clean the filter with gasoline
.
5. Dry the filter and put it bank into tank
.
6. Install the hose and clamp, then open the fuel valve to check whether it is
leak.
7. Install the cover and tighten the screws.
- 31 -
6. Install the muffler screen and the muffler cap.
7. Install the cover and tighten the screws.
6.6 Fuel tank filter
Never use the gasoline while smoking or in the
vicinity of an open flame.
1. Remove the fuel tank cap and filter.
Fuel tank cap
2. Clean the filter with gasoline.
3. Wipe the filter and install it.
4. Install the fuel tank cap.
Be sure the fuel tank cap is tightened securely.
6.7 Fuel filter
1. Remove the screws ①, and then remove the cover ②, and drain the fuel③
2. Hold and move up the clamp ④, then take off the hose ⑤ from the tank.
②
1
3. Take out the fuel filter
.
4. Clean the filter with gasoline
.
5. Dry the filter and put it bank into tank
.
6. Install the hose and clamp, then open the fuel valve to check whether it is
leak.
7. Install the cover and tighten the screws.

Echo EGi-3600LN Specifications

General

Brand	Echo
Model	EGi-3600LN
Category	Portable Generator
Language	English